Leatt Brace Neck Brace

The Leatt-Brace™ MOTO GPX is compatible with all motorcycle helmet types and our design allows riders an adequate range of movement. The Leatt-Brace™ MOTO GPX is designed for use on all motorcycles and ATVs for competition use, recreational riding and daily commuting. Materials – Glass Reinforced Nylon Upper and Lower
Weight: Medium – 850grams

Small and Medium sized models of the MOTO GPX are available. To determine the correct size of brace for your body, please use the following rough fitment guide: Small: 4 - 16 years old (thin build)
Medium: 16 years + (average to bigger build)  $395.00

Lonestar Axcaliber Axles

Axcaliber Racing Axles are the most widely used in the industry. They are Known for their adjustability and exceptional warranty. Get them for all models!  MX or Cross Country  starting at $389.00

Lonestar Swingarms

These swingarms are made of tough 4130 chromoly steel. They are many add-on options from length (-1 to +6), colors, additional cost for chrome, skid plate mounts and brake caliper mounting kits. Models of quad will vary prices and parts that are included in package. Please call for more info! Prices range from  $580.00 - $870.00

Herrman Racing A-Arms

These Long Travel A-Arms come with stainless steel tie rods and king pins made out of super strong  4140 alloy (not balljoints). They are shipped ready to bolt up and come in an array of colors!!! These are available for almost every sport quad!! Available lengths are +1 +0, +2 +0    $849.00

Gibson Racing MX A-Arms

These Gibson Long Travel Front End. Increases ground clearance as well as Shock Travel. The MX version will put your quad at 49 inches wide with the use of 4+1 rims. Used by top pros John Natalie, Pat Brown, Dustin Wimmer & Gil Attix. A variety of colors are in stock & available including candy red, YZ blue and Black. Please call or email for availability of in stock colors.  Was $1,295.00 NOW!! $999.99

Gibson Steering Stems +1 w/ Anti-vibe Clamp

These Gibson Steering Stems are made from 4130 chromoly and designed to withstand the toughest of abuse. Comes complete with anti vibe clamp in either std or Protaper style. Please specify when ordering. Colors available Candy Red, Candy Blue, YZ Blue, Black, CR Red and Silvervein. Was $339.00 NOW!! $299.00

Herrmann Racing Anti-vibe Steering Stems

These Herrmann Steering Stems are made from 4130 chromoly and tig weldedd, designed to withstand the ultimate racing abuse. You can get them with the clamp or without.  Please specify when ordering. Colors available gloss white, gloss black, translucent red, Honda red, Yamaha blue, gloss yellow, flat black or Kawi green. Available lengths are stock, +1, +2, +3  With clamp  $275.00 Without  clamp $225.00

Herrmann Racing

These aftermarket battery boxes serve many purposes. The most important is that it offers more clearance from the caliper during suspension compression and also allows you to remove your rear fenders without having to remove your battery. The battery box incorporates all mounting tabs for the stock electrical components.
Accepts stock battery or large aftermarket battery $149.99

Elka System 5 or System 3 Steering Dampers

The system 5  offers five different adjustments: high-speed damping, low-speed damping, return to center damping, angle between straight or cornering and cornering damping level. These adjustments allow a rider to fine-tune the steering damper to his riding style, helping him when needed without requiring unnecessary effort by removing vibration over choppy terrain, reducing arm pumping and rider fatigue.          $550.00

The system 3 steering damper shares the same compact design and reliability as the System 5. It features high-speed damping, low-speed damping and return to center damping adjustments. Both systems come with all the required mounting hardware specific to each vehicle. They will be offered as a lower mount rotary damper for the following ATV models: Honda TRX450R and TRX400EX, the Yamaha YFZ450, the Suzuki LT-R450 and LTZ400, the Kawasaki KFX400 and the Arctic Cat DVX400.           $475.00

Motowoz Front Shocks

Triple rate springs with ASP, rebound adjustability and compression adjustability. The shock bodies begin with high-quality, honed hydraulic cylinder tubing that is CNC machined. The bodies are then polished and plated for a superior look and full protection from the elements. The fully threaded bodies allow for infinite adjustability, while also utilizing “Stub Acme” threads, which are very resilient to damage.
$1,349.00 a pair 
mini shocks also available!!

Motowoz Rear Shocks

Dual rate springs with ASP, rebound adjustability and compression adjustability. The shock bodies begin with high-quality, honed hydraulic cylinder tubing that is CNC machined. The bodies are then polished and plated for a superior look and full protection from the elements. The fully threaded bodies allow for infinite adjustability, while also utilizing “Stub Acme” threads, which are very resilient to damage.
$935.00  

Elka Shocks System

Elite Series shock absorbers feature independent adjustability of the high- and low-speed compression. You can adjust your suspension to react differently to big hits, sharp edges and jumps as well as for cornering and when accelerating. Racing conditions can vary dramatically from one track to another, and sometimes even within the same track. Riders can now adjust their suspension to react with optimal efficiency over an entire track without compromise. The Elite Series is perfect for those seriously committed to the cutting edges in minutes with a simple two wire installation. Starting at    $1,255.00

Custom Axis Shocks System

Custom Axis shocks are designed and manufactured from the finest materials available, using the latest in CAD/CAM technology. We do not use cast or welded parts. Damper bodies are machined from a special smooth burnish ID steel tubing which is then treated with a special surface enhancement process that offers excellent wear and corrosion properties. Shock eyelet pivots utilize aircraft quality, teflon lined spherical bearings with stainless steel mounting spacers. All aluminum internal and external components are machined from 7075-T6 billet or 6061-T6 tubing and then hard anodized. Hard anodizing provides a durable external finish and prevents contamination of the suspension fluid. Starting at $680.00

We have Many more products in stock, or we can order it, if you need something call or email us!!

We have many ATV's and PIT BIKES for sale - contact us for more information.
Located at 23 Main Street, Williamsburg, MA. 01096 Ph: 413-268-0288. Come by, give us a call, or
email us today and find out what we can do for you!!